My visit to the MIDI HACK

Electronics, Music, Synthesizers

Last May 17-18 I attended to the MIDI HACK, which is by far the coolest Hackathon out there (IMO). Is not that I have been in others, but this one matched perfectly the kind of hacks that I like to make.

I had a great time surrounded by people with the same obsessions as me: music, electronics and computers. The event was great, it had nice food, a lot of drinks, coffee and the most important thing: the aura.

At the beginning I had no idea what I was going to build. So I spend the first three hours moving ideas in my brain and trying to come up with something feasible and not repeated. After looking at my bag I decided to do something that I wanted to do two years back…

I had in my bag a Monotron, a Meeblip and some Arduinos. So I decided to put them together and add some extra sauce by connecting a Raspberry Pi to handle OSC messages.

After some hours I decided to drop the Raspberry Pi because I couldn’t connect it to the Spotify’s  WIFI but it works fine otherwise.

 

This is a picture of the project:

Monobleep/Meblitron

 

And this is a more detailed diagram of the connections.

Diagram

So, The RPi runs Node.js and connects to the Arduinos by using the Arduino Firmata. One of the Arduinos sends CV signals to the Monotron in order to control the gate, pitch and cutoff. The second Arduino connects to a custom-made board containing knobs, buttons and LEDs.

The Meeblip is connected by using a standard USB to MIDI converter. The audio of the Meeblip is fed into the Monotron and it uses a potentiometer to control the amount of audio.

The custom controller is used to adjust a few of the parameters of the Meeblip.

Here you can find the code that runs in the RPi.

https://github.com/modlfo/monobleep-meeblitron

And here is the entry to the hackathon http://www.hackathon.io/29648

Making an extension board “Extendra”

Electronics, Synthesizers

The problem was very simple: adding more I/O to any of my boards (XMOS, Arduino, ChipKit, etc.) And the solution could have been simple as well: buying a board to do that, like a cheap Arduino clone or any other alternative that I don’t know.

But this time I decided to do the hard (and fun) way. I designed my own board.

I have made other PCB’s before, mostly etched and milled boards, but I never made a manufactured PCB. I decided to do it this way because I found that SeeedStudio sells very affordable PCB’s. So I started reading an Eagle tutorial (I used Altium at the University) and I found very little intuitive. Anyway, there’s a lot information about it and in a few hours I got my design and ordered the PCB.

I made a few mistakes, for example not labeling all the components and connectors. But electrically was correct.

I decided to use a PIC microcontroller the PIC16F1516. Why? because it has many analog inputs, low speed and cheap. However I found a few problems. I wanted to make an SPI Daisy chain, but seems that the PIC produces an interrupt every time a new byte is received and not when the chip is deselected (using the CS pin). The second problem is that the C compiler that Microchip provides for free practically performs no optimization. So if you check the generated assembly code it hurts your eyes. For any future project I will use AVR because they have free tools that are much better.

Apart from that, the board works correctly. I made two versions, one that is configurable using basic command like a Firmata board and other that makes a faster dump of values.

Extendra boards

Extendra boards

Here you can find the code here https://github.com/modlfo/extendra

The next step is connecting it…

No it’s not my birthday

Electronics, Music, Nostalgia

A few days ago me and my flatmate went to throw some trash to the recycling room. I was very happy when I saw that someone left this beauty  in the electronics container.

Even when here it is illegal to take the things from the container, I felt like a “savior” not as a “thieve” when I took this to my house. First I thought to take all the electronics, but it was a very nice surprise that the keyboard works perfectly.

This keyboard is a Casiotone MT-65. It is almost as old as me. The sound is very nice. According to Wikipedia this series of keyboards uses a synthesis method called “Vowel-Consonant synthesis”. The thing that I liked the most is a type of  delayed modulation that sounds like having aftertouch. You press the key, and some milliseconds after it starts to modulate the sound with a tremolo like. Most of the sounds a very interesting.

One cool thing is the rhythm box. It has many rhythms programmed and you can change the tempo with a knob to get cool effects.

This guy made an interesting modification to the keyboard:

Thank you very much to the person that gave me this present.

Mocotron: a Monotron inspired Reaktor instrument

Create, Electronics, Music, Synthesizers

Today I made a small Reaktor instrument based on the Monotron Synth

I really like this small synthesizer because it sounds very natural. I love the analog sound.

This is my version:

You can download it from the Reaktor user library HERE.

This is how the model looks:

I have also uploaded demo sound to Soundcloud, but the MP3 file that I made sounds really crappy.

(Now I know why it is called LAME encoder)